Lindy Switch User Manual download pdf (Page 20)

 









Resetting the conﬁguration

The LINDY KVM IP asks for an unknown admin password

This may occur if the LINDY KVM IP has been previously conﬁgured. If the

existing admin password cannot be discovered, then your only recourse is to

perform a factory reset.

To invoke a conﬁguration reset by switch

1 Remove power from the LINDY KVM IP unit.

2 At the rear of the LINDY KVM IP, adjacent to the power input socket, click

mini switch 1 to its ON (down) position.

3 Re-apply power to the LINDY KVM IP. On the locally connected monitor you

should see a Maintenance menu:

Maintenance

Reset Configuration

return to normal operation.

Configure Network

Put option switch 1 up to

To upgrade unit, visit:

http://192.168.42.154

IP Access Switch Plus Logon

Username: <

Password:

4 Select the ‘Reset conﬁguration’ option.

A warning screen will be displayed. Select the RESET option and press .

5 Remove power, return the mini switch 1 to its OFF position and then re-

apply power. The locally connected monitor should display the ﬁrst screen of

the initial conﬁguration sequence.

The LINDY KVM IP does not display the conﬁguration sequence

If the LINDY KVM IP has been previously conﬁgured it may not automatically

display the ﬁrst of the setup screens. In this case you have two options, either:

• Access the Unit, Network and Serial conﬁguration screens separately, or

• Reset the conﬁguration:

To invoke a conﬁguration reset by main menu

1 Using the locally connected keyboard and screen, log on as the admin user.

2 Select the ‘Conﬁguration’ option.

Configuration

Reset Configuration

Back

Modem Configuration

Network Configuration

Unit Configuration

3 Highlight the ‘Reset conﬁguration’ option and press .

A warning screen will be displayed, select the RESET option and press .

Reset Config

DO YOU WISH TO CONTINUE?

CancelRESET

WARNING: Continuing will cause

your existing configuration to

be erased.

The unit will then reset and

require re-configuring before

it can be used.

4 The LINDY KVM IP will reset and then display the ﬁrst of the four initial

conﬁguration screens.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 75 76

Comments to this Manuals

No comments

Lindy Switch User Manual Page 20

Comments to this Manuals

Related products and manuals for Computer Accessories Lindy Switch