Lindy Switch User Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 76
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
 




12
Local console connections: Audio
The LINDY KVM IP supports and distributes the stereo sound originated by the
host computer to the local console port, and also to the remotely connected
users.
To connect local speakers
1 Position a speakers in the vicinity of the LINDY KVM IP such that their cables
will easily reach.
5V
2A
A
M
O
D
E
M
DV
I
DV
I
VG
A
VG
A
K
/
M
K/M
V
M
PO
WER CONTR
OL
IN
D
O
O
R
U
S
E
O
N
L
Y
B
1
2
C
F
G
COMPUTER / KVMA SWITCH
KVMA CONSOLE
1
2
O
N
IP network port
The LINDY KVM IP provides an autosensing Ethernet IP port that can operate at
10 or 100Mbps, according to the network speed. The LINDY KVM IP is designed
to reside quite easily at any part of your network:
It can be placed within the local network, behind any firewall/router
connections to the Internet, or
It can be placed externally to the local network, on a separate sub-network
or with an open Internet connection.
Wherever in the network the LINDY KVM IP is situated, you will need to
determine certain configuration issues such as address allocation and/or firewall
adjustment to allow correct operation. Please refer to Networking issues within
the Configuration chapter for more details.
IMPORTANT: When the LINDY KVM IP is accessible from the public Internet or dial
up connection, you must ensure that sufficient security measures are employed.
To connect the IP network port
1 Depending upon where in the network the LINDY KVM IP is being
connected, run a category 5e or 6 cable from the appropriate hub or router
to the LINDY KVM IP.
2 Connect the plug of the category 5e or 6 cable into the IP port on the front
panel of the LINDY KVM IP.
2 Connect the main speaker cable to the port labelled
within the KVMA
CONSOLE section of the rear panel.
LOC
REM
VNC
100
LNK
PWR
IP
A
ccess Switch Plus
3 Configure the network settings as appropriate to the position of the LINDY
KVM IP within the network - see Networking issues for details.
Note: A firmware upgrade is required to enable digital audio via
VNC links. Check with LINDY for availability.
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 75 76

Comments to this Manuals

No comments