Lindy 32444 User Manual download pdf

LINDY NetCam

User Manual English

Benutzerhandbuch Deutsch

LINDY No. 32444

www.LINDY.com

English Manual

Introduction

Please check the package contents before proceeding, you should

find the following items included.

1. The LINDY NetCam

2. Power supply unit

3. Mounting bracket

4. I/O Terminal block connector

5. This user manual

6. CD-ROM containing driver, software and user manual

Description and Installation

The following elements can be fou

nd on the front of the camera: The

lens, the microphone and the status LED. On the back panel you can

find: the power connector, the I/O terminal block, the Ethernet jack

and the label containing the serial number. To connect the camera

via a hub to an existing network, please use a standard 1:1 patch

cable, to connect it directly to a PC, please use a crossover patch

cable.

If you wish to connect any external components (e.g. sensors/

alarms) then please refer to user manual on the CD-ROM. You can

now proceed to the installation and applying power to the LINDY

NetCam.

Setting the IP Address for the Camera

Please record the serial number from the label on the unit. This serial

number is the MAC address for the camera, for example

0002D11000520 = 00-02-D1-10-00-

52. There are two ways to assign

an IP address to this MAC address.

1. By using the ‘Installer.exe’ software on the CD-ROM

Run the ‘Installer.exe’ first, then power on the unit.

By using the DOS command line under Windows

Start a DOS Window and type the following commands:

Syntax: arp –s <IP address> <MAC address>

ping <IP address>

Example:

Viewing the Camera via a Web browser

Click on the serial

number that

corresponds to your

camera

Assign a free IP address

If you want to fix the

IP address of the un

it,

check the option ‘Use

this IP whenever the

system boots’

Click ‘Set IP Address’ to start the installation process

Type the arp command and press ‘enter’

Type the ping command and press ‘enter’

If you see the reply message, the unit has been install

successfully

Type the IP address that you’ve assigned. The required password is the

serial number (mind upper and lower cases), the login name is ‘root’

Click on the ’Configuration’ button for further adjustments

1 2

Summary of Contents

Page 1

Page 2

Radio Frequency Energy, Certifications Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission

Comments to this Manuals

No comments

Lindy 32444 User Manual

Browse online or download User Manual for Computer Accessories Lindy 32444. Lindy 32444 Benutzerhandbuch

Summary of Contents

Comments to this Manuals

Related products and manuals for Computer Accessories Lindy 32444