Lindy 43160 User Manual download pdf

USB 3.0 to 2x SATA Drive

Clone Adapter

User Manual English

Benutzerhandbuch Deutsch

Manuel d’utilisateur Français

Manuale d’uso Italiano

LINDY No.43160

www.lindy.com

Tested to Comply with FCC Standards

For Home and Office Use!

Upper Target LED

Target

Power Input USB Cable

Clone Button

Source

Bottom Source

LED

User Manual English

Overview

The LINDY USB 3.0 to 2x SATA Drive Clone Adapter can be used as

both an external dual HDD SATA adapter and a HDD clone adapter.

The HDD Cloning function should be used standalone and creates a bit

by bit clone of the source HDD onto the target HDD.

The HDD Docking function can be used when connected via

SuperSpeed USB 3.0, allowing easy data transfer and superior transfer

rates up to 5Gbps between the computer and HDDs, especially when

transferring large volumes of data.

Features

• Connects 2 SATA HDDs to a computer using a single connector

• Accepts 2.5/3.5” HDD with 22 pin SATA combo interface. For Micro

and Slim SATA and IDE drives, adapters and adapter cables are

available from LINDY separately.

• Computer connection via USB 3.0

• Supports SATA 1.5/3.0Gbps speed

• Compatible with Windows XP/Vista/7/Server2003/Server 2007

(32/64bit), Linux Kernel 2.6.31 and above (drivers included, native

support)

Package Contents

1x USB 3.0 to 2x SATA Drive Clone Adapter with integrated USB

3.0 cable type A

1x Power Supply 100-240VAC / 5V & 12V DC

1x Power Cord

1x This Manual

Installation and Use

• Connect the power supply

• If you want to clone HDDs we suggest not to connect the SATA

Clone Adapter to your computer

• For normal operation connect the SATA Clone Adapter to your

computer by USB 3.0 cable

• Connect the HDDs to the SATA Clone Adapter. The Operating

System should now detect the hard drives and make them available.

• HDDs may need to be partitioned / formatted using your operating

system disk management utility before you can access them.

• Before unplugging HDDs make sure data transfer processes are

completed.

Using the Clone Function

• Connect the source and target HDDs into the appropriate port: when

the source HDD is connected to the source port, the bottom blue

LED turns on; when the target HDD is connected to the target port,

the upper blue LED turns on.

• The target HDD must be of equal or larger capacity than the source

HDD

• Make sure target HDD is empty and not partitioned

• Press the “Clone Button” and hold it for 5 seconds. Then the “Upper

Target LED” starts flashing, indicating the clone progress.

• When the clone function is finished, the “Upper Target LED” will stop

blinking, but stay on. The “Bottom LED” will turn off.

• Do not switch or unplug the HDDs during this process!

1 2 3

Summary of Contents

Page 1 - www.lindy.com

USB 3.0 to 2x SATA Drive Clone Adapter User Manual English Benutzerhandbuch Deutsch Manuel d’utilisateur Français Manuale d’uso Italiano

Page 2

Handbuch Deutsch Einführung Der LINDY USB 3.0 Clone Adapter für 2 SATA-Festplatten kann sowohl als externer Adapter für

Page 3 - LINDY No.43610

Informazioni Italiano Introduzione L’adattatore Drive Clone USB 3.0 2x SATA può essere utilizzato per leggere due HDD

Comments to this Manuals

No comments

Lindy 43160 User Manual

Browse online or download User Manual for Laptop docks & port replicators Lindy 43160. Lindy 43160

Summary of Contents

Comments to this Manuals

Related products and manuals for Laptop docks & port replicators Lindy 43160