Lindy 70536 User Manual

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (November 2004) Raid SATA-150+USB2.0 Combo Low Profile PCI User Manu

- 10 - SiI 3112 Controller. 4.7. Windows ME installation 1. Power off the system. Insert Combo Card into an available PCI slot. Power up the s

- 11 - 'General'. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this devic

- 2 - 1. Introduction This Low Profile PCI Host Adapter is a PCI controller board to support Low profile PCI and regular size PCI both in one car

- 3 - Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives. Fully compliant with Serial ATA

- 4 - Disk Mirroring (RAID 1) Disk mirroring creates an identical twin for a selected disk by having the data simultaneously written to two disks.

- 5 - 6. Press CTRL+E and then press Y to exit the setup. 7. Continue with conventional Fdisk and Format steps as if you are installing a convention

- 6 - Follow the instructions in this section if you are performing a new installation of Windows 2000/XP, and you wish to boot from a device attach

- 7 - installing the driver. 13. The wizard will now copy the required files to the system and start the Driver. After starting the driver the wiza

- 8 - USB Root Hub The driver has started correctly. 4. Double click on 'SCSI and RAID Controllers', if there is no yello

- 9 - standard PCI-to-PCI bridge', click 'Next'. Select 'Search for the best driver for your device [Recommended]' and clic