Lindy CPU Switch MultiScreen 4/2 Specifications download pdf (Page 31)

LINDY CPU Switch Multiscreen Installation and Use Page 24

3. Using the LINDY CPU Switch Multiscreen

This section explains the general operation of the LINDY CPU Switch Multiscreen.

We recommend that you read this section before starting to use the product.

3.1 Power on status

At power on the LINDY CPU Switch Multiscreen selects computer 1 and displays ’1’.

If a password has been set then ‘P’ will be displayed and the LINDY CPU Switch

Multiscreen will remain locked until a valid password is entered.

3.2 Front panel key and remote controller

The front panel key is used to select which channel is currently controlled by the

shared keyboard, mouse and monitor ports. Pressing the key during normal

operation will cause the next channel to be selected.

The key can also be used to access the LINDY CPU Switch Multiscreen’s

configuration mode (see section 2.6). To do this press the key and hold it down for 5

seconds until ‘C’ appears on the LINDY CPU Switch Multiscreen’s front panel

display.

An optional remote controller is also available which replicates the front panel key

and display, but can be located remotely from the LINDY CPU Switch Multiscreen.

This is particularly useful in applications where the LINDY CPU Switch Multiscreen

is located away from the desktop. The remote controller can be conveniently

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

No comments

Lindy CPU Switch MultiScreen 4/2 Specifications Page 31